Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content

How to Replace a Starter: 2008-2013 Chevy Silverado

Your starter is a small but powerful electric motor that turns your engine over when you turn the key. When the starter motor begins to fail, you may hear a click, a whine, or nothing at all, and your truck won’t start no matter how many times you try. On a 2008-2013 Chevy Silverado, the starter sits on the passenger side of the engine and is reached through the front passenger-side wheel well, so you’ll need to lift your truck, remove the wheel, and pull back the wheel well liner to get to it.

Beyond a jack and jack stands, a few common socket sizes, and a torque wrench, you don’t need any specialty tools to replace a starter yourself. Our DIY video shows the steps to replace the starter on a 2011 Chevy Silverado 1500 with a 5.3L engine. While the process is similar for most 2008-2013 Silverado and GMC Sierra models, always check your owners manual for the specifics on your truck before getting started.

Tools & Supplies

Step-by-Step Instructions

Frequently Asked Questions

Product Recommendations

Additional Resources

Signs Your Chevy Silverado Needs a New Starter

A starter can fail suddenly, but it often gives you a few warning signs first. Our Professional Parts People recommend checking your starter if you notice:

  • A Single Click or No Click: If you hear one click, or nothing at all, when you turn the key, and your battery is charged, the starter solenoid or motor may not be engaging.
  • Slow Cranking: If the engine turns over slowly even with a fully charged battery, the starter motor may be wearing out and drawing too much current.
  • Whining With No Engagement: If you hear the starter spinning but the engine doesn’t turn over, the starter gear may not be engaging the flexplate.
  • Grinding Noise: A metallic grinding sound while starting can point to worn starter gear teeth or damaged teeth on the flexplate.

Tools & Supplies for the Job

How to Replace Your 2008-2013 Chevy Silverado Starter: Step-by-Step

Auto parts professional disconnecting the negative battery cable on a Chevy Silverado

Title: Step 1: Prep & Disconnect the Battery

Park on a level surface and open the hood. Put on your eye protection and gloves, then use a 10mm wrench or socket and ratchet to detach the negative battery cable. Set the cable aside so it won’t touch any metal.

Auto parts professional removing the front passenger wheel on a Chevy Silverado

Step 2: Lift the Truck & Remove the Front Passenger Wheel

Chock the rear wheels. Remove the front passenger-side hubcap or wheel cover if there is one, then use a lug wrench or a 22mm socket and breaker bar to loosen the lug nuts. Use a jack and jack stands to lift and support the front passenger side, then remove the lug nuts and the wheel.

Auto parts professional removing the wheel well liner on a Chevy Silverado

Step 3: Remove the Wheel Well Liner

Use a screwdriver and trim tool to remove the fasteners securing the wheel well liner, then remove the liner. Set the fasteners aside so you can reinstall them later.

Auto parts professional removing the transmission cover bolt from a Chevy Silverado starter

Step 4: Remove the Transmission Cover Bolt & Heat Shield

Once the liner is removed, locate the starter. Use a 10mm socket and ratchet to remove the transmission cover bolt, then remove the heat shield from the old starter.

Auto parts professional unclipping the solenoid connector from a Chevy Silverado starter

Step 5: Disconnect the Starter Wiring

Unclip the solenoid connector. Use a 13mm socket and ratchet to remove the positive cable nut, then slip the positive cable off the stud./p>

Pro Tip: Depending on how easily you can access the starter, you may want to remove the starter mounting bolts first so you can maneuver it into a position where it’s easier to reach the solenoid connector and positive cable. Just be sure to never let the starter hang by its cables.

Auto parts professional removing an old starter from a Chevy Silverado

Step 6: Remove the Old Starter

Use a 13mm socket with an extension and ratchet to remove the starter mounting bolts and lower the starter out of the wheel well.

Auto parts professional installing a new starter in a Chevy Silverado

Step 7: Install the New Starter

Compare the old starter with your new one to make sure you have the right replacement part. Lift your new starter into place and thread the two mounting bolts in by hand. Once the starter is secure, use your 13mm socket and extension to snug the bolts down, then use a torque wrench to tighten them to 37 foot-pounds.

Auto parts professional tightening a positive cable nut on a Chevy Silverado starter

Step 8: Reconnect the Wiring & Reinstall the Heat Shield

Reinstall the positive cable nut and tighten it to 80 inch-pounds, then reattach the solenoid connector. Reinstall the transmission cover bolt and tighten it to 80 inch-pounds, then install the heat shield on the new starter.

Auto parts professional reinstalling the wheel on a Chevy Silverado

Step 9: Reinstall the Wheel Well Liner & Wheel

Reinstall the wheel well liner using the fasteners you removed earlier. Reinstall the wheel and tighten the lug nuts until the wheel is flush against the rotor. Lower the front end and remove the wheel chocks, then use your torque wrench to tighten the lug nuts in a star pattern to 140 foot-pounds.

Auto parts professional reconnecting the negative battery cable on a Chevy Silverado

Step 10: Reconnect the Battery

Reinstall your negative battery cable and tighten the nut to 44 inch-pounds. Then, close the hood.

If you aren’t comfortable replacing the alternator on your Chevy Silverado, stop by your local O’Reilly Auto Parts. We can recommend a professional shop or a Certified Auto Repair Service Center in your area to get the job done right.

Free Starter & Alternator Testing at O’Reilly Auto Parts

If you’re unsure whether your starter is the problem, O’Reilly Auto Parts provides free starter and alternator testing. Our parts professionals will test your starter or alternator, on or off the truck. If your starter passes the test, we can help you look into other potential issues, like your battery or alternator. If it fails, we’ll help you find the replacement part needed to get your truck back on the road safely.

Frequently Asked Questions: Chevy Silverado Starter Replacement

Where’s the starter on a Chevy Silverado located?

On a 2008-2013 Chevy Silverado, the starter is mounted on the passenger side of the engine, where the engine meets the transmission. The easiest way to reach the starter is through the front passenger-side wheel well. Once you lift your truck, remove the wheel, and take out the wheel well liner, you’ll find the starter behind a heat shield near the transmission cover.

How much does it cost to replace a Chevy Silverado starter?

The cost to replace a starter depends on a few things: your specific Silverado and engine, whether you purchase a new or remanufactured starter, and whether you install it yourself or take it to a shop. Replacing the starter yourself typically costs less than a shop repair because you’re only paying for the parts, not the labor. Check with your local O’Reilly Auto Parts or OReillyAuto.com for current pricing on the right starter for your Chevy Silverado.

How long does it take to replace a Chevy Silverado alternator?

Most people can replace the alternator on a 2008-2013 Chevy Silverado in about 1 to 2 hours. You don’t need a lift or any specialty tools, and the alternator is accessible from the top of the engine bay once the engine cover is off. Rusted or tight mounting bolts or unfamiliarity with removing or reinstalling a serpentine belt can add extra time, so it’s worth setting aside a little extra if this is your first alternator project.

What’s a starter core charge, and how do I get a refund?

A core charge is a refundable deposit added to the price of some parts, like starters, to encourage recycling or remanufacturing. When you bring your old starter back to any O’Reilly Auto Parts location with your receipt, you’ll get the core charge refunded.

Product Recommendations

Product Comparison Table
Item Recommended Product Purpose
Starter
Ultima Select Starter Mounts to the engine and engages the flexplate to crank the engine and start the truck
Ratchet & Socket Set
Power Torque Tool Set with 10mm & 13mm Sockets and Extension Disconnects the battery cable and removes the transmission cover bolt, positive cable nut, and starter mounting bolts
Lug Wrench
Power Torque Tools 14” Lug Wrench Loosens and removes the lug nuts so you can remove the front passenger wheel to access the starter
Torque Wrench
Power Torque ½” Drive Torque Wrench Tightens the starter mounting bolts, positive cable nut, transmission cover bolt, lug nuts, and negative battery cable nut to specification
Screwdriver & Trim Tool
Power Torque Flathead Screwdriver & Titan Trim Tool Removes the wheel well liner fasteners to access the starter
Lifting Equipment
Power Torque Jack, Jack Stands, & Wheel Chocks Secures the rear wheels and lifts and supports the front passenger side of the truck
Safety Gear
SAS Nitrile Gloves & Eye Protection Protects your hands and eyes while working under the truck

Additional Resources

The automotive repair work depicted in this series is performed under the direction of the manufacturer of the product featured. Prior to undertaking any of the demonstrated repairs on your vehicle, we suggest you consult with a certified mechanic or another professional who can adequately advise you of the proper repair or remedy required. O’Reilly Automotive Stores, Inc. and its affiliates (“O’Reilly”) disclaims any responsibility for injury or damage resulting from a viewer’s attempt to recreate the repairs shown in this series..