Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
NGK Iridium/Platinum Plug Number SILKR7H8 Spark Plug - 92154
Ultima Starter - Remanufactured - R713081
Gates GlobalSpiral 1 Inch Hydraulic Coupling - G20325-1616
Murray Climate Control Straight Heater Fitting - 84732

Product

Attributes

Fitting Type
----
----
----
Heater Fitting
Material
----
----
----
Steel
Seat
Gasket
----
----
----
Thread Size
M12-1.25
----
----
----
Flange Diameter (in)
----
----
1-3/4 Inch
----
Flange Diameter (mm)
----
----
44.5mm
----
Heat Range
7
----
----
----
Length (in)
----
----
5-13/16 Inch
----
Length (mm)
----
----
148mm
12mm
Rotation Direction
----
Counter-Clockwise
----
----
Design
----
Permanent Magnet Offset Gear Reduction
----
----
Mounting Shims Included
----
No
----
----
New Or Remanufactured
----
Remanufactured
----
----
Nose Cone Type
----
Closed
----
----
Solenoid Attached
----
Yes
----
----
Hex Size (mm)
16mm
----
----
----
Hose Inside Diameter (in)
----
----
1 Inch
----
Hex Size (in)
5/8 Inch
----
----
----
Drop (in)
----
----
2-7/8 Inch
----
Drop (mm)
----
----
73mm
----
kW Rating (kW)
----
1.4kW
----
----
Voltage (V)
----
12 Volt
----
----
Hose Inside Diameter (mm)
----
----
25mm
----
OE Manufacturer
----
Mitsubishi
----
----
Fitting Size
----
----
----
1/2, 5/8 Inch
Maximum Working Pressure (psi)
----
----
5000 psi
----
Preset Gap (in)
0.032 Inch
----
----
----
Preset Gap (mm)
0.8mm
----
----
----
Thread Reach (in)
1.043 Inch
----
----
----
Mounting Bolts Included
----
No
----
----
Bend Angle (Deg)
----
----
----
Straight
Center Electrode Core Material
Copper
----
----
----
Center Electrode Tip Material
Iridium
----
----
----
Approximate Resistor Value (Ohm)
5000 Ohm
----
----
----
Insulator Height (mm)
51mm
----
----
----
Cut Off (in)
----
----
3-5/8 Inch
----
Cut Off (mm)
----
----
91.6mm
----
Flange Head Thickness (in)
----
----
5/16 Inch
----
Insulator Height (in)
2.010 Inch
----
----
----
Ground Electrode Tip Material
Platinum
----
----
----
Flange Head Thickness (mm)
----
----
8.1mm
----
Thread Reach (mm)
26.5mm
----
----
----
Number Of Pinion Teeth
----
9
----
----
Starter Drive Included
----
Yes
----
----
Overcrank Protection
----
No
----
----
Service Number
SILKR7H8
----
----
----
Metallurgy
Iridium/Platinum
----
----
----