Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Left Continue Shopping Print Print
NGK Copper Plug Number CR5HSA Spark Plug - 7840
Import Direct Chassis Control Arm And Ball Joint Assembly - 4CB70125
Gates FleetRunner Micro-V Serpentine Belt 8 Rib 80-3/16 Inch - K080797HD
MasterPro Chassis Idler Arm - K9424

Product

Attributes

Warranty
1 Year Limited Warranty
Limited Lifetime Warranty
1 Year Limited Warranty
Limited Lifetime Warranty
Number Of Ribs
----
----
8
----
Seat
Gasket
----
----
----
Thread Size
M10-1.0
----
----
----
Top Width (in)
----
----
1-1/16 Inch
----
Top Width (mm)
----
----
28mm
----
Heat Range
5
----
----
----
Adjustable
----
No
----
----
Hardware Included
----
Yes
----
----
Hex Size (mm)
16mm
----
----
----
Attachment Method
----
----
----
Bolt-On
Ball Joint Included
----
Yes
----
----
Bushings Included
----
Yes
----
----
Dust Boot Included
----
Yes
----
Yes
Grease Fitting Included
----
No
----
----
Greaseable
----
No
----
----
Hex Size (in)
5/8 Inch
----
----
----
Outside Length (in)
----
----
80-3/16 Inch
----
Outside Length (mm)
----
----
2037mm
----
Length Center To Center (in)
----
----
----
6.122 Inch
Washer Included
----
----
----
No
Length Center To Center (mm)
----
----
----
155mm
Ball Joint Stud Type
----
Threaded
----
----
Bushing Material
----
Rubber
----
----
Pre-Greased
----
Yes
----
Yes
Preset Gap (in)
0.028 Inch
----
----
----
Preset Gap (mm)
0.7mm
----
----
----
Thread Reach (in)
0.500 Inch
----
----
----
Castle Nut Included
----
----
----
Yes
Cotter Pin Included
----
----
----
Yes
Lock Nut Included
----
----
----
No
Bolt Hole Center To Center (in)
----
----
----
2.657, 4.409 Inch
Dust Boot Color
----
Black
----
----
Ball Joint Attachment Method
----
Unitized
----
----
Center Electrode Core Material
Copper
----
----
----
Center Electrode Tip Material
Nickel
----
----
----
Locking Nut Included
----
Yes
----
----
Approximate Resistor Value (Ohm)
5000 Ohm
----
----
----
Insulator Height (mm)
50.1mm
----
----
----
Belt Back Material
----
----
EPDM Rubber
----
Insulator Height (in)
1.970 Inch
----
----
----
Dust Boot Material
----
Rubber
----
----
Thread Reach (mm)
12.7mm
----
----
----
Bolt Hole Center To Center (mm)
----
----
----
67mm
Nut Wrench Size
----
----
----
17mm, 22mm
Control Arm Position
----
Front Right Lower Rearward
----
----
Ball Joint Bearing Material
----
Polymer
----
----
Service Number
CR5HSA
----
----
----
Metallurgy
Copper
----
----
----