Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
MasterPro Chassis Tie Rod End - EV800633
Super Start Power Sport Battery Group Size BTX14L AGM - ETX14L
Precision Nitrile Rubber (NBR) Multi-Purpose O-Ring - 114
Gates Mega Crimp Hydraulic Adapter - G60142-0608

Product

Attributes

Adapter Type
----
----
----
SAE To SAE
Battery Type
----
AGM
----
----
Material
----
----
Nitrile Rubber (NBR)
----
Thread Size
----
----
----
1/2-14 Inch
Height (in)
----
5-3/4 Inch
----
----
Height (mm)
----
146mm
----
----
Inside Diameter (in)
----
----
5/8 Inch
----
Inside Diameter (mm)
----
----
16mm
----
Length (in)
----
5-7/8 Inch
----
----
Length (mm)
----
149mm
----
----
Outside Diameter (in)
----
----
13/16 Inch
----
Outside Diameter (mm)
----
----
21mm
----
Thickness (mm)
----
----
3mm
----
Width (in)
----
3-7/16 Inch
----
----
Width (mm)
----
87mm
----
----
Terminal Type
----
Top Post
----
----
Weight (Lbs)
----
11.5 Lbs.
----
----
Dust Boot Included
No
----
----
----
Grease Fitting Included
No
----
----
----
Greaseable
No
----
----
----
Washers Included
Yes
----
----
----
Thickness (in)
----
----
1/8 Inch
----
Voltage (V)
----
12 Volt
----
----
Cold Cranking Amps (CCA)
----
220 CCA
----
----
End 1 Thread Size
----
----
----
1/2-14 Inch
End 2 Thread Size
----
----
----
3/8-18 Inch
Group Size (BCI)
----
BTX14L
----
----
Amp Hour (Ah)
----
12 AH
----
----
10 Amp Hour Rate (Ah)
----
12 AH
----
----
Pre-Greased
Yes
----
----
----
Castle Nut Included
No
----
----
----
Cotter Pin Included
No
----
----
----
Lock Nut Included
Yes
----
----
----
Lock Washer Included
No
----
----
----
Weight
0.6 Lbs.
----
----
----
Positive Terminal Location
----
Top Right
----
----
Adjusting Sleeve Included
No
----
----
----
Rod End Thread Gender
Male
----
----
----
Rack End Thread Gender
Male
----
----
----
Ball Stud Type
Threaded
----
----
----
Ball Stud Housing Material
Steel
----
----
----
Flush Manifold Vent Cover
----
Yes
----
----
Ball Stud Bearing Material
Polymer
----
----
----
Add Acid And Charge Required
----
No
----
----