Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
MasterPro Chassis Tie Rod End - EV800564
Autolite Copper Core Spark Plug - 2892
Fel-Pro Multi-Layer Steel (MLS) Head Gasket - 26361PT
Gates Hi-Power II V-Belt 1/2 Inch x 93 Inch - A91

Product

Attributes

Angle (Deg)
----
----
----
39 Degree
Notched
----
----
----
No
Number Of Strands
----
----
----
1
Seat
----
Flat
----
----
Thread Size
----
M14-1.25
----
----
Top Width (in)
----
----
----
1/2 Inch
Top Width (mm)
----
----
----
13mm
Bore (mm)
----
----
87.5mm
----
Heat Range
----
15
----
----
Dust Boot Included
No
----
----
----
Grease Fitting Included
No
----
----
----
Greaseable
No
----
----
----
Hex Size (in)
----
13/16 Inch
----
----
Washers Included
No
----
----
----
Belt Type
----
----
----
Classical Section Wrapped V-Belt
Outside Length (in)
----
----
----
93 Inch
Outside Length (mm)
----
----
----
2362mm
Pre-Greased
Yes
----
----
----
Thread Reach (in)
----
0.500 Inch
----
----
Resistor Plug
----
No
----
----
Castle Nut Included
No
----
----
----
Cotter Pin Included
No
----
----
----
Lock Nut Included
Yes
----
----
----
Lock Washer Included
No
----
----
----
Head Gasket Material
----
----
Multi-Layer Steel (MLS)
----
Center Electrode Core Material
----
Copper
----
----
Center Electrode Tip Material
----
Nickel
----
----
Weight
1.2 Lbs.
----
----
----
Approximate Resistor Value (Ohm)
----
1 Ohm
----
----
Insulator Height (mm)
----
55.8mm
----
----
Adjusting Sleeve Included
No
----
----
----
Belt Back Material
----
----
----
Polyester
Cylinder Head Bolts Included
----
----
No
----
Insulator Height (in)
----
2.197 Inch
----
----
Ground Electrode Tip Material
----
Nickel
----
----
Thread Reach (mm)
----
13mm
----
----
Rod End Thread Gender
Male
----
----
----
Rack End Thread Gender
Male
----
----
----
Ball Stud Type
Threaded
----
----
----
Ball Stud Housing Material
High Strength Steel
----
----
----
Ball Stud Bearing Material
Polymer
----
----
----
Head Gasket Thickness (mm)
----
----
1.21mm
----
Metallurgy
----
Copper
----
----