Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Murray Plus 180 Degree Thermostat - 4288
Lisle Bearing Race And Seal Driver - 12810
Autolite Copper Core Spark Plug - 3116
MasterPro Chassis Stabilizer/Sway Bar Link Kit - K6667

Product

Attributes

Bypass Flange Diameter (in)
1-1/8 Inch
----
----
----
Diameter (in)
----
4.625 Inch
----
----
Flange Thickness (in)
1/16 Inch
----
----
----
Material
Copper, Stainless Steel
----
----
----
Seat
----
----
Gasket
----
Thread Size
----
----
M18-1.50
----
Flange Diameter (in)
2-1/4 Inch
----
----
----
Flange Diameter (mm)
58mm
----
----
----
Heat Range
----
----
5
----
Height (in)
1-7/8 Inch
----
----
----
Height (mm)
48mm
----
----
----
Hex Size (mm)
----
----
21mm
----
Bolts Included
----
----
----
No
Bushings Included
----
----
----
No
Dust Boot Included
----
----
----
Yes
Grease Fittings Included
----
----
----
Yes
Greaseable
----
----
----
Yes
Hex Size (in)
----
----
7/8 Inch
----
Washers Included
----
----
----
No
Temperature (Deg F)
180 Degree
----
----
----
Jiggle Pin Included
Yes
----
----
----
Pre-Greased
----
----
----
Yes
Gasket Or Seal Included
Yes
----
----
----
Preset Gap (in)
----
----
0.030 Inch
----
Preset Gap (mm)
----
----
0.86mm
----
Thread Reach (in)
----
----
0.500 Inch
----
Castle Nut Included
----
----
----
No
Cotter Pin Included
----
----
----
No
Lock Nuts Included
----
----
----
No
Sleeves Included
----
----
----
No
Number Of Nuts
----
----
----
2
Center Electrode Core Material
----
----
Nickel-Copper Alloy
----
Center Electrode Tip Material
----
----
Nickel
----
Approximate Resistor Value (Ohm)
----
----
1000 Ohm
----
Insulator Height (mm)
----
----
57mm
----
Insulator Height (in)
----
----
2.244 Inch
----
Height Between Flanges (in)
1-3/8 Inch
----
----
----
Ground Electrode Tip Material
----
----
Nickel
----
Thread Reach (mm)
----
----
12.7mm
----
Ball Stud Type
----
----
----
Threaded
Ball Stud Housing Material
----
----
----
Steel
Ball Stud Bearing Material
----
----
----
Sintered Metal
Flange Thickness (mm)
1mm
----
----
----
Bypass Flange Diameter (mm)
29mm
----
----
----
Metallurgy
----
----
Copper
----