Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Import Direct Chassis Control Arm And Ball Joint Assembly - 5CB70103
Gates Coolant Hose - 24738
Autolite Copper Core Spark Plug - 295
Precision Axle Shaft Seal - 711096

Product

Attributes

Centerline Length (in)
----
14-1/16 Inch
----
----
Centerline Length (mm)
----
357mm
----
----
Material
----
EPDM Rubber
----
----
Number Of Branches
----
0
----
----
Seat
----
----
Gasket
----
Thread Size
----
----
M14-1.25
----
Heat Range
----
----
6
----
Inside Diameter (in)
----
----
----
1.457 Inch
Inside Diameter (mm)
----
----
----
37mm
Outside Diameter (in)
----
----
----
2.134 Inch
Outside Diameter (mm)
----
----
----
54.2mm
Thickness (mm)
----
----
----
9mm
Width (in)
----
----
----
0.354 Inch
Hardware Included
Yes
----
----
----
Hex Size (mm)
----
----
21mm
----
Seal Material
----
----
----
Polyacrylate Rubber (ACM)
Ball Joint Included
Yes
----
----
----
Bushings Included
Yes
----
----
----
Grease Fitting Included
No
----
----
----
Greaseable
No
----
----
----
Hex Size (in)
----
----
13/16 Inch
----
Thickness (in)
----
----
----
0.354 Inch
Molded
----
Yes
----
----
Bushing Material
Rubber
----
----
----
Pre-Greased
Yes
----
----
----
Preset Gap (in)
----
----
0.030 Inch
----
Preset Gap (mm)
----
----
0.76mm
----
Thread Reach (in)
----
----
0.374 Inch
----
Ball Joint Attachment Method
Unitized
----
----
----
Center Electrode Core Material
----
----
Nickel
----
Center Electrode Tip Material
----
----
Nickel
----
Approximate Resistor Value (Ohm)
----
----
1000 Ohm
----
Insulator Height (mm)
----
----
59.1mm
----
Number Of Quick Connect Fittings
----
0
----
----
Insulator Height (in)
----
----
2.327 Inch
----
Ground Electrode Tip Material
----
----
Nickel
----
Thread Reach (mm)
----
----
9mm
----
End 1 Inside Diameter (in)
----
1-3/16 Inch
----
----
End 2 Inside Diameter (in)
----
1-3/16 Inch
----
----
End 1 Inside Diameter (mm)
----
30mm
----
----
End 2 Inside Diameter (mm)
----
30mm
----
----
Control Arm Position
Front Right Lower
----
----
----
Ball Joint Bearing Material
Polymer
----
----
----
Metallurgy
----
----
Copper
----