Import Direct Chassis Control Arm And Ball Joint Assembly - 5CB70046
MasterPro Chassis Drag Link - DS300040
Autolite Platinum Spark Plug - AP605
Autolite Platinum Spark Plug - AP666
Product
Attributes
Warranty
Seat
----
----
Tapered
Tapered
Thread Size
----
----
M14-1.25
M14-1.25
Heat Range
----
----
8
7
Adjustable
No
No
----
----
Hardware Included
Yes
Yes
----
----
Hex Size (mm)
----
----
16mm
16mm
Stud Thread Size
----
M16-1.50
----
----
Ball Joint Included
Yes
----
----
----
Bushings Included
----
No
----
----
Dust Boot Included
----
Yes
----
----
Grease Fitting Included
No
No
----
----
Greaseable
No
No
----
----
Hex Size (in)
----
----
5/8 Inch
5/8 Inch
Bar Size (in)
----
1-1/8 Inch
----
----
Bushing Material
Rubber
----
----
----
Pre-Greased
Yes
Yes
----
----
Preset Gap (in)
----
----
0.060 Inch
0.060 Inch
Preset Gap (mm)
----
----
1.52mm
1.52mm
Thread Reach (in)
----
----
0.679 Inch
0.433 Inch
Resistor Plug
----
----
----
Yes
Inner Tie Rod End Included
----
No
----
----
Ball Joint Attachment Method
Bolt-On
----
----
----
Center Electrode Core Material
----
----
Nickel
Nickel
Center Electrode Tip Material
----
----
Platinum
Platinum
Approximate Resistor Value (Ohm)
----
----
4000 Ohm
4000 Ohm
Insulator Height (mm)
----
----
51.5mm
62.74mm
Adjusting Sleeve Included
----
No
----
----
Insulator Height (in)
----
----
2.026 Inch
2.470 Inch
Dust Boot Material
----
Rubber
----
----
Ground Electrode Tip Material
----
----
Nickel
Nickel
Thread Reach (mm)
----
----
17.25mm
10.95mm
Control Arm Position
Front Right Lower
----
----
----
Ball Joint Bearing Material
Polymer
----
----
----
Metallurgy
----
----
Platinum
Platinum