Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Gates SureLok Air Brake Fitting - G31050-0004
Super Start Power Sport Battery Group Size BTX14 AGM - ETX14
American Grease Stick NiCopp Nickel-Copper Alloy 12 Inch Brake Line - CNE312
Precision Multi-Purpose Seal - 225230

Product

Attributes

Battery Type
----
AGM
----
----
Finish
----
----
Anodized Black
----
Material
----
----
Nickel-Copper Alloy
----
Height (in)
----
5-3/4 Inch
----
----
Height (mm)
----
146mm
----
----
Inside Diameter (in)
----
----
----
2.047 Inch
Inside Diameter (mm)
----
----
----
51.99mm
Length (in)
1-1/8 Inch
5-7/8 Inch
12 Inch
----
Length (mm)
29mm
149mm
----
----
Outside Diameter (in)
----
----
----
2.846 Inch
Outside Diameter (mm)
----
----
----
72.3mm
Width (in)
----
3-7/16 Inch
----
0.315 Inch
Width (mm)
----
87mm
----
8mm
Terminal Type
----
Top Post
----
----
Weight (Lbs)
----
11.5 Lbs.
----
----
Seal Material
Ethylene Propylene
----
----
Nitrile Rubber (NBR)
Tube Outside Diameter (in)
----
----
3/16 Inch
----
Tube Size (in)
1/4 Inch
----
----
----
Voltage (V)
----
12 Volt
----
----
Cold Cranking Amps (CCA)
----
220 CCA
----
----
Temperature Range (Deg F)
-40 To 200 Degree
----
----
----
Fitting Material
Brass
----
----
----
Group Size (BCI)
----
BTX14
----
----
Temperature Range (Deg C)
-40 To 93 Degree
----
----
----
Fittings Included
----
----
Yes
----
Fitting Size
1/4 Inch
----
----
----
Amp Hour (Ah)
----
12 AH
----
----
10 Amp Hour Rate (Ah)
----
12 AH
----
----
Maximum Working Pressure (psi)
150 psi
----
----
----
Fitting Type End 1
----
----
Bubble
----
Fitting Type End 2
----
----
Bubble
----
Positive Terminal Location
----
Top Left
----
----
Thread Size End 2 (in)
----
----
3/8 Inch
----
Thread Size End 1 (in)
----
----
3/8 Inch
----
Tube Outside Diameter (mm)
----
----
5mm
----
Flush Manifold Vent Cover
----
Yes
----
----
Thread Size End 1 (mm)
----
----
M10-1.0
----
Thread Size End 2 (mm)
----
----
M10-1.0
----
Bending Method
----
----
Bending Tool Not Required
----
Add Acid And Charge Required
----
No
----
----