Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Gates Hi-Power II V-Belt 1/2 Inch x 58 Inch - A56
BrakeBest Select Pro Rear Ceramic Brake Pads - SPC1120
Brembo Prime Line Front Brake Rotor - 09.B970.11
Murray Plus 180 Degree Thermostat - 3588

Product

Attributes

Angle (Deg)
38 Degree
----
----
----
Bypass Flange Diameter (in)
----
----
----
1-7/16 Inch
Construction
----
----
Full Cast
----
Flange Thickness (in)
----
----
----
1/16 Inch
Material
----
----
High Carbon Cast Iron
Copper
Notched
No
----
----
----
Number Of Strands
1
----
----
----
Top Width (in)
1/2 Inch
----
----
----
Top Width (mm)
13mm
----
----
----
ABS Sensor Ring Included
----
----
No
----
Discard Thickness (mm)
----
----
28.0mm
----
Flange Diameter (in)
----
----
----
2-5/8 Inch
Flange Diameter (mm)
----
----
----
37mm
Height (in)
----
----
----
2 Inch
Height (mm)
----
----
----
51mm
Outside Diameter (in)
----
----
13.580 Inch
----
Outside Diameter (mm)
----
----
345mm
----
Installation Hardware Included
----
Yes
----
----
Center Hole Size (mm)
----
----
68mm
----
Nominal Thickness (mm)
----
----
30mm
----
Overall Height (mm)
----
----
52mm
----
Belt Type
Classical Section Wrapped V-Belt
----
----
----
Center Hole Size (in)
----
----
2.680 Inch
----
Discard Thickness (in)
----
----
1.100 Inch
----
Outside Length (in)
58 Inch
----
----
----
Outside Length (mm)
1473mm
----
----
----
Overall Height (in)
----
----
2.050 Inch
----
Temperature (Deg F)
----
----
----
180 Degree
Wear Sensor Type
----
Mechanical
----
----
Slotted
----
Yes
----
----
Jiggle Pin Included
----
----
----
No
Number Of Bolt Holes
----
----
5
----
Gasket Or Seal Included
----
----
----
No
Solid Or Vented
----
----
Vented
----
Anti-Rattle Clip Included
----
Yes
----
----
Rust Resistant Coating
----
----
Yes
----
Belt Back Material
Polyester
----
----
----
Height Between Flanges (in)
----
----
----
1-3/8 Inch
Brake Pad Material
----
Ceramic
----
----
Flange Thickness (mm)
----
----
----
1mm
Bypass Flange Diameter (mm)
----
----
----
37mm
Hat Diameter (mm)
----
----
214mm
----