Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Gates Heater Hose - 18899
Fel-Pro Head Gasket Set - HS26511PT1
Autolite Iridium XP Spark Plug - XP3922
BrakeBest Select Front Brake Rotor - 980377RGS

Product

Attributes

Centerline Length (in)
17 Inch
----
----
----
Centerline Length (mm)
432mm
----
----
----
Construction
----
----
----
Full Cast
Material
EPDM Rubber
----
----
Cast Iron (G3000)
Seat
----
----
Gasket
----
Style
----
----
----
OE Equivalent
Thread Size
----
----
M14-1.25
----
ABS Sensor Ring Included
----
----
----
No
Discard Thickness (mm)
----
----
----
28.0mm
Heat Range
----
----
11
----
Outside Diameter (in)
----
----
----
12.421 Inch
Outside Diameter (mm)
----
----
----
316mm
Rotation Direction
----
----
----
Clockwise
Hex Size (mm)
----
----
16mm
----
Studs Included
----
----
----
No
Center Hole Size (mm)
----
----
----
58mm
Overall Height (mm)
----
----
----
56mm
Hex Size (in)
----
----
5/8 Inch
----
Center Hole Size (in)
----
----
----
2.283 Inch
Discard Thickness (in)
----
----
----
1.102 Inch
Overall Height (in)
----
----
----
2.228 Inch
Cross Drilled
----
----
----
No
Molded
Yes
----
----
----
Slotted
----
----
----
No
Number Of Bolt Holes
----
----
----
5
Preset Gap (in)
----
----
0.040 Inch
----
Preset Gap (mm)
----
----
0.99mm
----
Thread Reach (in)
----
----
0.750 Inch
----
Resistor Plug
----
----
Yes
----
Bolt Pattern
----
----
----
5 On 4-1/2 Inch, 5 On 114mm
Inner Bearing Included
----
----
----
No
Solid Or Vented
----
----
----
Vented
Number Of Studs
----
----
----
0
Center Electrode Core Material
----
----
Nickel
----
Center Electrode Tip Material
----
----
Iridium
----
Rust Resistant Coating
----
----
----
Yes
Approximate Resistor Value (Ohm)
----
----
4000 Ohm
----
Insulator Height (mm)
----
----
50.77mm
----
Surface Finish
----
----
----
Non-Directional
Insulator Height (in)
----
----
1.999 Inch
----
Ground Electrode Tip Material
----
----
Platinum
----
Thread Reach (mm)
----
----
19mm
----
End 1 Inside Diameter (in)
5/8 Inch
----
----
----
End 2 Inside Diameter (in)
5/8 Inch
----
----
----
End 1 Inside Diameter (mm)
16mm
----
----
----
End 2 Inside Diameter (mm)
16mm
----
----
----
Metallurgy
----
----
Iridium/Platinum
----