Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Century Drill Bit - 88415
Import Direct P/S Pressure Line Hose Assembly - 13402302
Import Direct Chassis Control Arm - 3CB70047
WIX Fuel/Water Separator Filter - 33651

Product

Attributes

Material
Steel
Chlorosulfonated Polyethylene (CSM)
----
----
Micron Rating
----
----
----
10 Micron
Style
----
----
----
Cartridge
Type
General Purpose
----
----
----
Height (in)
----
----
----
7-1/8 Inch
Length (in)
3-7/8 Inch
68-3/8 Inch
----
----
Length (mm)
98mm
1739mm
----
----
Outside Diameter (in)
----
----
----
3-3/4 Inch
Adjustable
----
----
No
----
Case Included
No
----
----
----
Ball Joint Included
----
----
No
----
Bushings Included
----
----
Yes
----
Dust Boot Included
----
----
No
----
Grease Fitting Included
----
----
No
----
Greaseable
----
----
No
----
Drain Plug Included
----
----
----
No
Tip Material
Titanium Nitride
----
----
----
Switch Port Included
----
Yes
----
----
Pre-Greased
----
----
No
----
Gasket Or Seal Included
----
----
----
Yes
Castle Nut Included
----
----
No
----
Cotter Pin Included
----
----
No
----
Lock Nut Included
----
----
No
----
Number Of Pieces
1
----
----
----
Coating
Titanium Nitride
----
----
----
Weight
----
1.60 Lbs.
3 Lbs.
----
Filter Media
----
----
----
Cellulose
End 1 Fitting Type
----
Banjo
----
----
Rubber Hose Standard
----
Exceeds SAE J188 specifications
----
----
Crimped Sleeve Material
----
Anti-Corrosion Aluminum
----
----
Heat Sleeves Included
----
No
----
----
Copper Washers Included
----
Yes
----
----
Bracket Bushings Included
----
Yes
----
----
Rubber Mounts Included
----
No
----
----
Hose Positioning Clips Included
----
Yes
----
----
End 2 Fitting Size
----
16mm
----
----
End 1 Fitting Size
----
16mm
----
----
Control Arm Position
----
----
Rear Upper
----
C-Clip Included
----
----
No
----
Bit Diameter (in)
15/64 Inch
----
----
----
Bit Diameter (mm)
5.953mm
----
----
----
Drill Bit Point Angle (Deg)
135 Degree
----
----
----
For Use On Material Type
Metal, Plastic, Wood
----
----
----