Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
BrakeBest Select Front Ceramic Brake Pads - SC1422
Murray Plus 180 Degree Thermostat - 4288
Autel TPMS Scanner - 700060
Autolite Copper Core Spark Plug - 3116

Product

Attributes

Bypass Flange Diameter (in)
----
1-1/8 Inch
----
----
Flange Thickness (in)
----
1/16 Inch
----
----
Material
----
Copper, Stainless Steel
Various
----
Seat
----
----
----
Gasket
Thread Size
----
----
----
M18-1.50
Flange Diameter (in)
----
2-1/4 Inch
----
----
Flange Diameter (mm)
----
58mm
----
----
Heat Range
----
----
----
5
Height (in)
----
1-7/8 Inch
----
----
Height (mm)
----
48mm
----
----
Installation Hardware Included
Yes
----
----
----
Hex Size (mm)
----
----
----
21mm
Case Included
----
----
Yes
----
Hex Size (in)
----
----
----
7/8 Inch
Frequency (MHz)
----
----
315, 433 MHz
----
Case Length (in)
----
----
12-15/16 Inch
----
Temperature (Deg F)
----
180 Degree
----
----
Wear Sensor Type
Mechanical
----
----
----
Slotted
Yes
----
----
----
Jiggle Pin Included
----
Yes
----
----
Gasket Or Seal Included
----
Yes
----
----
Battery Included
----
----
Yes
----
Preset Gap (in)
----
----
----
0.030 Inch
Preset Gap (mm)
----
----
----
0.86mm
Thread Reach (in)
----
----
----
0.500 Inch
Anti-Rattle Clip Included
No
----
----
----
Valve Cap Included
----
----
Yes
----
Valve Core Included
----
----
Yes
----
Case Height (in)
----
----
10-7/16 Inch
----
Case Width (in)
----
----
3-15/16 Inch
----
Programming Tool Included
----
----
Yes
----
Center Electrode Core Material
----
----
----
Nickel-Copper Alloy
Center Electrode Tip Material
----
----
----
Nickel
Approximate Resistor Value (Ohm)
----
----
----
1000 Ohm
Insulator Height (mm)
----
----
----
57mm
Insulator Height (in)
----
----
----
2.244 Inch
Height Between Flanges (in)
----
1-3/8 Inch
----
----
Ground Electrode Tip Material
----
----
----
Nickel
Thread Reach (mm)
----
----
----
12.7mm
Brake Pad Material
Ceramic
----
----
----
Noise-Reducing Shim Included
Yes
----
----
----
Noise-Reducing Chamfers
Yes
----
----
----
Integrally Molded
Yes
----
----
----
Flange Thickness (mm)
----
1mm
----
----
Bypass Flange Diameter (mm)
----
29mm
----
----
Metallurgy
----
----
----
Copper