Warning Sorry, you're using a web browser that is no longer supported. For the best experience please upgrade or visit the site on another browser.
Skip to content
Autolite Copper Core Spark Plug - 4302
Import Direct Chassis Control Arm And Ball Joint Assembly - 2CB60033
Import Direct Chassis Stabilizer/Sway Bar Link Kit - LS17193
Lisle 3 Piece 3/8 Inch Drive Socket Set - 12550

Product

Attributes

Bit Type
----
----
----
Hex
Quantity
----
----
----
3
Seat
Gasket
----
----
----
Thread Size
M10-1.0
----
----
----
Heat Range
15
----
----
----
Adjustable
----
No
----
----
Hardware Included
----
Yes
----
----
Hex Size (mm)
16mm
----
----
----
Socket Size (in)
----
----
----
1/4, 3/8 Inch
Bolts Included
----
----
No
----
Overall Length (in)
----
----
13-11/16 Inch
----
Ball Joint Included
----
Yes
----
----
Bushings Included
----
----
No
----
Dust Boot Included
----
----
Yes
----
Grease Fitting Included
----
No
----
----
Grease Fittings Included
----
----
No
----
Greaseable
----
No
No
----
Hex Size (in)
5/8 Inch
----
----
----
Washers Included
----
----
No
----
Bit Size (in)
----
----
----
1/4, 3/8 Inch
Socket Size (mm)
----
----
----
8mm
Bushing Material
----
Rubber
----
----
Pre-Greased
----
Yes
Yes
----
Drive Size (in)
----
----
----
3/8 Inch
Preset Gap (in)
0.030 Inch
----
----
----
Preset Gap (mm)
0.76mm
----
----
----
Thread Reach (in)
0.750 Inch
----
----
----
Cotter Pin Included
----
----
No
----
Lock Nuts Included
----
----
Yes
----
Sleeves Included
----
----
No
----
Ball Joint Attachment Method
----
Press-In
----
----
Bit Size (mm)
----
----
----
8mm
Center Electrode Core Material
Nickel
----
----
----
Center Electrode Tip Material
Nickel
----
----
----
Approximate Resistor Value (Ohm)
5000 Ohm
----
----
----
Insulator Height (mm)
50.5mm
----
----
----
Insulator Height (in)
1.988 Inch
----
----
----
Ground Electrode Tip Material
Nickel
----
----
----
Thread Reach (mm)
19mm
----
----
----
Control Arm Position
----
Rear Right Upper
----
----
Ball Joint Bearing Material
----
Polymer
----
----
Ball Stud Type
----
----
Threaded
----
Ball Stud Bearing Material
----
----
Polymer
----
Metallurgy
Copper
----
----
----